What Does Oc Mean on Samsung Dishwasher? How to Fix It

What Does Oc Mean on Samsung Dishwasher?

what does oc mean on samsung dishwasher

Have you ever wondered what does OC mean on Samsung dishwasher, this is a pretty common occurrence on Samsung dishwasher.

If you’ve been experiencing water leaks coming from your Samsung dishwasher, you may have noticed the term “oc” (over-level water error) popping up in your machine’s display. This error code is indicative of a problem with your dishwasher’s water level sensor, which can result in water leaking onto the floor. Fortunately, this problem is easy to fix and doesn’t require any special tools or expertise. Keep reading for instructions on how to troubleshoot and fix the oc error on your Samsung dishwasher.

See more: What Does LC Mean on a Samsung Dishwasher? How to Fix

What Does Oc Mean on Samsung Dishwasher? How to Fix It

The OC error code on a Samsung dishwasher is caused by a problem with the water level sensor. This sensor is responsible for detecting how much water is in the dishwasher and signaling the machine to stop filling once it reaches the correct level. If the water level sensor is faulty, it can cause the dishwasher to overfill and leak water onto the floor.

How to check OC error on Samsung dishwasher:

  • Inspect the dishwasher’s drain connection at the sink.
  • Check the drain hose.
  • Run water in the sink that the dishwasher is connected to.
  • Clean the drain, filter, and sump in the tub.

You’ll need to replace the water level sensor to fix the oc error on your Samsung dishwasher. This relatively easy repair can be completed in about 30 minutes. However, you’ll need a few essential tools, including a Phillips head screwdriver and a putty knife.

1. Begin by unplugging your dishwasher from the power outlet. Then, open up the dishwasher door and remove the lower rack.

2. Next, locate the water level sensor on the left side of the dishwasher tub (it will be a small plastic float attached to a wire). Use a putty knife to pry the sensor free from its mount carefully.

3. Once the sensor is free, you can unscrew it from the wire using a Phillips head screwdriver.

4. To install the new water level sensor, reverse the removal process. Screw the new sensor into place, and then reattach it to its mount.

5. Finally, plug your dishwasher back in and run a test cycle to ensure that the oc error is gone.

If you’re having trouble finding a replacement water level sensor for your Samsung dishwasher, you can always contact a local appliance repair shop or Samsung customer service for assistance.

How to Fix if Your Dishwasher Isn't Draining

In the above, you probably understood what does oc mean on Samsung dishwasher. Here are some ways to fix if your dishwasher isn’t draining

Inspect the dishwasher’s drain connection at the sink:

The first step is to check the dishwasher’s drain connection at the sink. If this connection is loose or leaky, it can cause water to back up into the dishwasher and lead to leaks.

To tighten a loose drain connection:

1. Begin by disconnecting the dishwasher’s drain hose from the garbage disposal or sink.

2. Next, use a wrench to tighten the connection between the dishwasher’s drain hose and the disposal or sink.

3. Once the connection is tight, reattach the dishwasher’s drain hose and turn on the power to the dishwasher. Finally, run a test cycle to see if the leak has been fixed.

If the connection is still leaking, you may need to replace the dishwasher’s drain hose.

Check the drain hose:

Another common cause of water leaks is a clogged or damaged drain hose. The drain hose carries water from the dishwasher tub to the sink drains. If this hose becomes clogged or damaged, it can cause water to back up and leak out of the dishwasher.

To clean a clogged drain hose:

1. Begin by disconnecting the dishwasher’s drain hose from the garbage disposal or sink.

2. Next, use a plunger to try and clear any blockages from the drain hose.

3. Once the drain hose is clear, reattach it to the disposal or sink and turn on the power to the dishwasher. Finally, run a test cycle to see if the leak has been fixed.

If the drain hose is damaged, you’ll need to replace it with a new one.

Run water in the sink that the dishwasher is connected to:

If your dishwasher is leaking water onto the floor, the sink it’s connected to may be causing the problem. When a dishwasher drains, a small amount of water will always remain in the tub. This water can sometimes back up into the sink and cause leaks.

To fix this problem, run the water in the sink for a few minutes before starting the dishwasher. This will help clear any blockages in the drain and prevent water from backing up into the dishwasher.

Clean the drain, filter, and sump in the tub:

Another common cause of leaks is a clogged drain, filter, or sump in the dishwasher tub. These parts can become clogged with food debris, grease, and other gunk. When they’re clogged, water can’t drain properly and will start to leak out of the dishwasher.

To clean the drain, filter, and sump:

1. Begin by disconnecting the dishwasher’s power supply.

2. Remove the dishwasher tub’s drain hose from the garbage disposal or sink.

3. Use a plunger to try and clear any blockages from the drain, filter, or sump.

4. Once the parts are precise, reattach the drain hose and turn the power to the dishwasher. Finally, run a test cycle to see if the leak has been fixed.

If you’re still having problems, you may need to replace the dishwasher’s drain pump.

Clean the drain, filter, and sump in the tub:

Another common cause of leaks is a clogged drain, filter, or sump in the dishwasher tub. These parts can become clogged with food debris, grease, and other gunk over time. When they’re clogged, water can’t drain properly and will start to leak out of the dishwasher.

To clean the drain, filter, and sump:

1. Begin by disconnecting the dishwasher’s power supply.

2. Remove the dishwasher tub’s drain hose from the garbage disposal or sink.

3. Use a plunger to try and clear any blockages from the drain, filter, or sump.

4. Once the parts are precise, reattach the drain hose and turn the power to the dishwasher. Finally, run a test cycle to see if the leak has been fixed.

If you’re still having problems, you may need to replace the dishwasher’s drain pump.

Confirm your drain line is not frozen:

If your dishwasher leaks water and you live in an area where the temperatures get cold, your dishwasher’s drain line may be frozen. A frozen drain line will prevent water from draining correctly and can cause leaks.

To thaw a frozen drain line:

1. Begin by disconnecting the dishwasher’s power supply.

2. Remove the dishwasher tub’s drain hose from the garbage disposal or sink.

3. Use a hair dryer to thaw any ice blocking the drain line.

4. Once the drain line is clear, reattach the hose and turn on the power to the dishwasher. Finally, run a test cycle to see if the leak has been fixed.

If your dishwasher’s drain line is frozen, you may need to replace it with a new one.

Request service:

If you’ve tried all the above and your dishwasher is still leaking, it’s time to call for professional help. A leaky dishwasher can cause a lot of damage to your home if it’s not fixed quickly, so it’s best to err on the side of caution and request service.

When you call for service, be sure to have the model number of your dishwasher on hand. This will help the technician diagnose the problem and get your dishwasher fixed quickly.

Final Thoughts on What Does OC Mean on Samsung Dishwasher

The OC error code on a Samsung dishwasher indicates that the water inlet valve is not working properly. This can be caused by a clogged filter, a frozen drain line, or a faulty water inlet valve. If you’re experiencing this problem, be sure to clean the dishwasher’s filter and check the drain line for any blockages. You may also need to replace the water inlet valve. If the problem persists, call for professional service. Thanks for reading!

5/5 - (3 votes)

Leave a Comment